PULUZ
PULUZ 60m Waterproof Hosing Sealed Diving Case (Transparent)
₹3,855.00
Details
Features
1. Panoramic Invisibility Shooting. Compatible with DJI Osmo 360/360 II, providing 360-degree complete invisibility, helping to minimize the obstruction of the housing in underwater panoramic stitching, eliminating blind spots.
2. 60-meter Waterproof Protection. Double-sided locking buckles and silicone sealing rings ensure a secure seal, while the hardened PC housing helps resist everyday bumps and scratches.
3. High-Definition Light Transmission Imaging. The lens material is acrylic with 95% light transmittance; after AR anti-reflective coating, light transmittance reaches 97%, helping to preserve clear underwater details.
4. Flexible Installation and Expansion. Folding double-claw interface and 1/4-inch screw hole for easy connection to compatible selfie sticks, grips, and tripods.
5. Practical Accessories Included. Includes a waterproof housing, lens cover, 12 anti-fog filters, and cleaning wipes, convenient for preparing for diving and snorkeling shooting.
Usage Precautions:
1. Before each use, perform a shallow water leak test with an empty housing. Do not exceed a depth of 60 meters.
2. Keep the sealing ring clean, intact, and properly installed, fully tightening both side latches.
3. Keep the inside of the case dry. Do not insert the anti-fog film into the seal or obstruct the lens.
4. After seawater use, rinse the case with fresh water, dry the exterior before opening, and avoid drying with hot air.
5. Camera, selfie stick, and tripod are not included; set the camera and stitching options according to the instructions before shooting.
Package List
1. Waterproof case x 1
2. Lens cover x 1
3. Anti-fog sheet x 2 packs (12 pieces in total)
4. Cleaning wipes x 2
5. Manual x 1
1. Panoramic Invisibility Shooting. Compatible with DJI Osmo 360/360 II, providing 360-degree complete invisibility, helping to minimize the obstruction of the housing in underwater panoramic stitching, eliminating blind spots.
2. 60-meter Waterproof Protection. Double-sided locking buckles and silicone sealing rings ensure a secure seal, while the hardened PC housing helps resist everyday bumps and scratches.
3. High-Definition Light Transmission Imaging. The lens material is acrylic with 95% light transmittance; after AR anti-reflective coating, light transmittance reaches 97%, helping to preserve clear underwater details.
4. Flexible Installation and Expansion. Folding double-claw interface and 1/4-inch screw hole for easy connection to compatible selfie sticks, grips, and tripods.
5. Practical Accessories Included. Includes a waterproof housing, lens cover, 12 anti-fog filters, and cleaning wipes, convenient for preparing for diving and snorkeling shooting.
Usage Precautions:
1. Before each use, perform a shallow water leak test with an empty housing. Do not exceed a depth of 60 meters.
2. Keep the sealing ring clean, intact, and properly installed, fully tightening both side latches.
3. Keep the inside of the case dry. Do not insert the anti-fog film into the seal or obstruct the lens.
4. After seawater use, rinse the case with fresh water, dry the exterior before opening, and avoid drying with hot air.
5. Camera, selfie stick, and tripod are not included; set the camera and stitching options according to the instructions before shooting.
Package List
1. Waterproof case x 1
2. Lens cover x 1
3. Anti-fog sheet x 2 packs (12 pieces in total)
4. Cleaning wipes x 2
5. Manual x 1
